Mitsubishi Electronics DD-6050 User Manual download pdf (Page 13)

–

1L25

CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL

INPUT JACKS SUCH AS MD DECK OR DAT DECK

Use an audio coaxial or optical digital cable (not included) for the audio connections.

Connecting to an amplifier equipped with digital input jacks such as MD Deck or DAT Deck:

AUDIO OUT

COAXIAL R

S-VIDEO

OUT

COMPONENT

VIDEO OUT

DIGITAL AUDIO OUT

VIDEO

OUT

To COAXIAL DIGITAL AUDIO INPUT jack

Amplifier equipped with digital

input jacks, MD deck,

DAT deck, etc.

To VIDEO

INPUT jack

To VIDEO OUT jack

To S-VIDEO INPUT jack

To S-VIDEO OUT jack

To COAXIAL DIGITAL

AUDIO OUT jack

[Fig. 6]

Notes

¡The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound

by an MD or DAT deck.

¡Be sure to turn off the power to all components in the system before connecting another component.

¡Refer to the Owner’s Manuals for the components to be connected to the DVD player.

¡Set "DOLBY DIGITAL" and "DTS" to "OFF" for audio output in the setup mode. Playing a DVD using

incorrect settings may generate noise distortion, and may also damage the speakers (See page 32 to set "ON"

for "DOLBY DIGITAL" and "DTS").

HOW TO CONNECT TO A TV WITHOUT AUDIO/VIDEO INPUT JACKS

If your TV does not have RCA type audio and video input jacks, it is still possible to connect this DVD

player to your TV’s 75-ohm coaxial antenna terminal using a commercially available Stereo Audio/Video

RF Modulator that is not included. Connect the audio and video outputs of the DVD player to the audio and

video inputs on the RF Modulator, and then connect the coaxial output of the RF Modulator (usually marked

“TO TV”) to the 75-ohm coaxial antenna terminal on your TV. Follow the instruction supplied with the RF

Modulator for more details.

If your TV’s 75-ohm coaxial antenna terminal is already occupied by an antenna or cable box connection,

remove that cable from your TV’s antenna terminal and reconnect it to the coaxial antenna input terminal

of the RF Modulator (usually marked “ANT IN”), then connect the RF modulator to your TV’s antenna

terminal as described above.

Note

¡The picture quality from DVD discs will not be as good if the DVD player is connected to the TV’s

antenna terminal through an RF Modulator.

E5931UD_2çZ.qxp 04.2.25 6:00 PM Page 13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 39 40

Comments to this Manuals

No comments

Mitsubishi Electronics DD-6050 User Manual Page 13

Comments to this Manuals