Mitsubishi Electronics DX-TL5716U User Manual download pdf (Page 7)

Beginning

Caution and care

HEAVY OBJECTS SHOULD NEVER BE PLACED ON THE UNIT (E.G., MONITOR)

NEVER TOUCH OR INSERT ANY OBJECT INSIDE THE UNIT

Touching the inside of the cabinet or inserting foreign objects of any kind through the disc loading slot or ventilation holes not

only creates a safety hazard but can also cause extensive damage.

PROTECT THE POWER CORD

Damage to the power cord may cause ﬁ re or shock hazard. If the power cord is damaged, turn OFF the MAIN switch and

carefully unplug the cord by holding the main plug.

If this unit is moved with the power on status, the built-in HDD may be damaged. Conﬁ rm that more than one minute have

passed since the power cord and the connecting cords were disconnected, then move this unit. Make sure to take the disc

out and close the disc loading slot.

UNPLUG THE POWER CORD DURING A LONG ABSENCE

Turn off the power and unplug the power cord during a long absence.

MAINTAIN GOOD VENTILATION

Do not obstruct the many ventilation holes on the unit. For maximum ventilation, leave some space around the unit and place

the unit on a hard level surface only, and ensure it is not covered during use. Heavy objects should never be placed on the

unit.

WHEN NOT IN USE

When not in use, always eject the disc and turn OFF the MAIN switch.

CABINET CARE

Never use petroleum-based cleaners. Clean with a soft cloth moistened with soap and water and wipe dry.

PVC cables or leads should not be left in contact with the cabinet surface for long periods.

INSTALLATION LOCATION

For excellent performance and lasting reliability install in a location that is:-

1. Well ventilated, out of direct sunlight and away from direct heat.

2. A solid vibration-free surface.

3. Free from high humidity, excessive dust and away from magnetic ﬁ elds.

4. Please ensure that the ventilation fan located on the unit’s back panel is not blocked.

UNSUITABLE LOCATIONS

Placing the unit in the following places might shorten the product life:

• Extremely cold places, such as refrigerated warehouses and ice houses

• Places where excessive hydrogen sulﬁ de is likely to be generated, such as hot-springs areas

• Places or locations with salt air environment.

NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.

DO NOT PLACE HEAVY OBJECT ON THIS UNIT.

DO NOT STEP ONTO THIS UNIT.

DO NOT PLACE ANY OBJECTS IN FRONT OF THE DISC LOADING SLOT.

The unit may drop or fall by losing its balance. It may cause injury or failure of the unit.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

THIS APPARATUS MUST BE GROUNDED.

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

No comments

Mitsubishi Electronics DX-TL5716U User Manual Page 7