Mitsubishi Electronics Mitsubishi Digital Electronics Home Theater System 838 User Manual download pdf (Page 16)

16 3. TV Features

For assistance call 1(800) 332-2119

To display 3D gaming or 3D cinema content, your

Mitsubishi TV requires:

A compatible 3D source device outputting a 3D •

signal in one of these formats:

Checkerboard format, 1080p, 60-Hz; (lower -

resolutions may be supported but will not fill the

screen)

Side-by-Side format, 1080p, 24/30/60 Hz; 720p, -

60 Hz

Active-shutter 3D glasses, DLP link type or IR •

emitter type with matching emitter

Please visit our website at www.mitsubishi-tv.com for infor-

mation about future TV software updates that will broaden

3D signal compatibility.

Initial Setup

If your 3D glasses came with an emitter box,

connect the emitter box to the

3D GLASSES

EMITTER

jack. Place the box in front of the TV

where there is a clear path to the glasses.

Note: If your glasses are marked DLP Link, skip this

step; no emitter box is required with DLP Link

technology.

HDMI

AUDIO

OUTPUT

Pb Pr

INPUT 2

INPUT 1

DIGITAL

AUDIO

OUTPUT

DVI/PC

(480i / 480p / 720p / 1080i)

LR INPUT

AUDIO

Y/ VIDEO

Pb Pr

Y/ VIDEO

GLASSES

EMITTER

ANT

AUDIO

AUDIO/SURROUND

OUTPUT

IR-NetCommand

Output/EXTERNAL

CONTROLLER INPUT

CENTER

INPUT

SUB

WOOFER

OUTPUT

LAN

HDMI

AUDIO

OUTPUT

Pb Pr

INPUT 2

INPUT 1

DIGITAL

AUDIO

OUTPUT

DVI/PC

(480i / 480p / 720p / 1080i)

LR INPUT

AUDIO

Y/ VIDEO

Pb Pr

Y/ VIDEO

GLASSES

EMITTER

ANT

AUDIO

AUDIO/SURROUND

OUTPUT

IR-NetCommand

Output/EXTERNAL

CONTROLLER INPUT

CENTER

INPUT

SUB

WOOFER

OUTPUT

LAN

Power on the TV and the source device.

Connect the source device to the TV’s HDMI input.

When the

New Device Found screen displays,

name the input.

Press

EXIT

to close the New Device Found screen.

Watching 3D Video

Note: Active 3D glasses are required.

Press

INPUT

Highlight the icon for the 3D video device and press

ENTER

Press

and select the Picture > 3D Mode

menu.

Select

for 3D Mode

. The On setting will be

memorized for the current input when you exit this

menu.

Select the

Source Format. If your source device

outputs an unsupported signal format see “Notice

Concerning Format Compatibility” on this page.

For

Glasses Control, select the control type for

your 3D glasses, either IR Emitter or DLP Link.

Use the Picture > 3D Mode menu to enable 3D video.

Press

EXIT

to close the menu.

If the image does not appear correct

(e.g., objects

appear to be moving in instead of out),

open the

Picture > 3D Mode menu and set Glasses L-R to

Reverse.

To Watch Regular (non-3D) Video

The 3D Mode setting is memorized for each input.

When you want to watch non-3D video on the input

selected above, open the Picture > 3D Mode menu

and set 3D Mode to Off.

3D Video

Notice Concerning Format Compatibility

Mitsubishi 3DTVs (738 and 838 series) currently support

the side-by-side 3D signal format. For support of other 3D

formats, such as top-bottom and frame packing (3D Blu

Ray standard), Mitsubishi 3DTVs will require the use of a 3D

source device that outputs the 3D checkerboard format or

a 3D source device coupled with the Mitsubishi 3D adapter.

In all cases an emitter and matching 3D active shutter

glasses or DLP Link active shutter glasses are required in

order to view 3D content.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 39 40

Comments to this Manuals

No comments

Mitsubishi Electronics Mitsubishi Digital Electronics Home Theater System 838 User Manual Page 16

Comments to this Manuals