Mitsubishi Electronics AJ65SBT-64AD User Manual download pdf (Page 33)

4 - 2

MELSEC-A

4 SETUP AND PREPARATION BEFORE OPERATION

CAUTION

Dispose of the product as industrial waste.

Use the module in the environment indicated in the general specifications given in

this manual.

Not doing so can cause an electric shock, fire, malfunction, product damage or

deterioration.

Securely fix the module to a DIN rail or with mounting screws, and securely tighten

the mounting screws within the specified torque range.

Undertightening can cause a drop or malfunction.

Overtightening can cause a drop or malfunction due to damage of the screws or

module.

Mount or dismount the module to or from an enclosure after switching power off

externally in all phases. Not doing so can cause the module to fail or malfunction.

(1) Perform the tightening of the module installation screws and terminal screws in the

following range.

Screw Location Tightening Torque Range

Module mounting screw (M4 screw) 78 to 108N cm

Terminal block terminal screw (M3 screw) 59 to 88N cm

Terminal block mounting screw (M3.5 screw) 68 to 98N cm

(2) When using the DIN rail adapter, install the DIN rail by making sure of the

following:

(a) Applicable DIN rail models (conforming to the JIS-C2B12)

TH35-7.5Fe

TH35-7.5Al

(b) DIN rail installation screw interval

When installing the DIN rail, tighten the screws with less than 200mm (7.87

inch) pitches.

(3) When mounting the AJ65SBT-64AD to the DIN rail, press with your finger the

centerline of the DIN rail hook at the bottom of the module until it clicks.

DIN rail

DIN rail hook

(4) Refer to the Master Module user's manual for the name, specification, and

manufacturers of supported cables for the use with AJ65SBT-64AD.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 73 74

No comments

Mitsubishi Electronics AJ65SBT-64AD User Manual Page 33