Mitsubishi Electronics Pro 930SB User Manual download pdf (Page 5)

Controls – continued

Size and Position Controls

Left/Right: Moves the image horizontally (left or right).

Down/Up: Moves the image vertically (up or down).

Narrow/Wide: Decreases or increases the horizontal size of the

image.

Short/Tall: Decreases or increases the vertical size of the image.

Color Control System

Colour presets selects the desired colour setting. The bar is replaced

by the colour setting choice. Each colour setting is adjusted at the

factory to the stated Kelvin. If a setting is adjusted, the name of the

setting will change from Kelvin to Custom except sRGB mode.

Red, Green, Blue: Color Control System decreases or increases

the monitor’s red, green or blue colour guns depending upon which

is selected. The change in colour will appear on screen and the

direction (decrease or increase) will be shown by the bars.

sRGB mode: sRGB mode provides the suitable colour managed

picture image. You can not change Red, Green and Blue colours,

brightness and contrast individually.

Colour Temperature Adjustment: Adjusts the colour temperature

of the screen image.

Geometry Controls

Geometry Controls Menu

The Geometry controls allow you to adjust the curvature or angle of

the sides of your display.

Sides In/Out (pincushion): Decreases or increases the curvature

of the sides either inward or outward.

Sides Left/Right (pincushion balance): Decreases or increases

the curvature of the sides either to the left or right.

Sides Tilt (parallelogram): Decreases or increases the tilt of the

sides either to the left or right.

Sides Align (trapezoidal): Decreases or increases the bottom of

the screen to be the same as the top.

Rotate (raster rotation): Rotates the entire display clockwise or

counterclockwise.

Corner Correction: Allows you to adjust the geometry of the corners

of your display – Top or Bottom.

Tools 1

Moiré Canceler: Moiré is a wavy pattern which can sometimes

appear on the screen. The pattern is repetitive and superimposed

as rippled images. When running certain applications, the wavy

pattern is more evident than in others. To reduce moiré, adjust the

level by using –/+ CONTROL buttons.

Linearity: This selection allows you to adjust the spacing of the

area on the screen. The purpose of this control is to ensure that a

one-inch circle is a true one-inch circle wherever it is on the screen.

The best way to determine the vertical linearity is as follows:

• Draw equally spaced horizontal lines using a drawing applica-

tion that has a ruler.

• Use the Vertical Balance control to adjust the lines near the top

and bottom of your screen.

• Use the LINEARITY (VER.) control to adjust the spacing between

the lines near the center and top of your screen.

Convergence: Aligns all three colors (R,G,B) to form a single color

(white). The purpose of this control is to ensure that a white line

drawn on the screen is as crisp and clear as possible.

• Use the CONVERGENCE (HOR.) control to adjust the alignment of

the lines in the up/down direction.

• Use the CONVERGENCE (VER.) control to adjust the alignment of

the lines in the left/right direction.

GlobalSync Control: Eliminates picture impurities that may result

from the earth’s magnetic field. While in the sub-menus

(GLOBALSYNC, TOP LEFT, TOP RIGHT, BOTTOM LEFT or BOTTOM

RIGHT), use the –/+ control buttons to fine tune the GlobalSync

corrections.

NOTE: Mitsubishi recommends that you perform GlobalSync

correction while running a typical application such as a

spreadsheet or text document.

Tools 2

Language: OSM controls menus are available in 6 languages.

OSM Position: You can choose where you would like the

OSM controls menu to appear on your screen. Selecting

OSM Position allows you to manually adjust the OSM controls menu

position from among Center, Top left, Top right, Bottom left and Bottom

right.

OSM Turn Off: The OSM controls menu will stay on as long as it is in

use. In the OSM Turn Off sub-menu, you can select how long the

monitor waits after the last touch of a button for the OSM controls

menu to disappear. The preset choices are 5 thru 120 seconds.

OSM Lock Out: This control completely locks out access to all OSM

controls functions except Brightness and Contrast. When attempting

to activate OSM controls while in the lock out mode, a screen will

appear indicating that OSM controls are locked out. To activate the

OSM Lock Out function, press SELECT and hold + down

simultaneously. To deactivate the OSM Lock Out, press SELECT

and hold + down simultaneously.

IPM System Off Mode:

Enable: The IPM System works normally and all stages of energy

savings are utilized.

Disable: The Off Mode of the IPM System is not used.

NOTE: For standard systems and graphics boards, keep the factory

setting at ENABLE.

NOTE: Do not keep the monitor on when ‘No Signal’ is applied.

This could cause image burn-in on the screen due to the

‘No Signal’ message being displayed.

EdgeLock Control: Operating your monitor at a nonstandard timing

may cause images to appear darker than normal or have color

distortion. Use of the EdgeLock control will adjust images to their

normal state.

Hot Key: This selection allows you to use

as brightness control

and –/+ as contrast control. When Hot key function is set to “ON”,

accessing the OSD is only possible with the “EXIT” button.

Factory Preset: Selecting Factory Preset allows you a reset most

OSM control settings back to the factory settings. A warning statement

will appear to confirm that you do want to reset ALL settings. Individual

settings can be reset by highlighting the control to be reset and

pressing the RESET button.

Information

Display Mode: Indicates the current mode and frequency setting of

the monitor.

Monitor Info: Indicates the model and serial numbers of your monitor.

Refresh Notifier: A message will advise you if the refresh rate of the

signal being applied to the monitor by the computer is too low. For

further information, please refer to your display card or system

manual.

ENERGYSTAR Product

As an ENERGYSTAR Partner,

NEC-Mitsubishi Electronics Display of America, Inc. has

determined that this product meets the E

NERGYSTAR guidelines for

energy efficiency. The E

NERGYSTAR emblem does not represent

EPA endorsement of any product or service.

English

1 2 3 4 5 6 7 8 9 10 ... 41 42

Comments to this Manuals

No comments

Mitsubishi Electronics Pro 930SB User Manual Page 5

Comments to this Manuals

Related products and manuals for TVs & monitors Mitsubishi Electronics Pro 930SB