Mitsubishi Electronics PAC-YG31CDA User Manual download pdf (Page 31)

8.8.2 Notification Setting

BMS carries out the monitor of the state, in order to know the state of Object of BACnetIF.

Notification is the function notified to the BACnet (or Building Automation System), when the value currently

supervised exceeds a limit or it changes to an alarm value. There are COV type and EVENT in Notification.

Item Contents Target object name

COV (Change Of Value)

Notification

Example) When the [RoomTemp] value

currently supervised changes, BACnet IF

send a COV notification message to the

BMS.

All

Except for

Notification Class and Device

EVENT Notification When the decided specific conditions are

satisfied, it announces to a BMS.

Example1) When the [Alarm Signal] value

currently supervised changes to the alarm

value, BACnet IF send a notification

message to the BMS.

Example 2) When the [RoomTemp] value

currently supervised exceeds a limit,

BACnet IF sends a notification message to

the BMS.

All

Except for

Notification Class and Device

8.8.2.1 COV notification setup

The destination address of a COV notification message is setup.

The number of the address, which can be registered, is to 10.

Select the [COV Notification Settings] tab.

COV No.

Set the number

of COV

notification.

(1) Add COV notification address

Click the [Add] button. The [Notification Address] screen will open.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 45 46

No comments

Mitsubishi Electronics PAC-YG31CDA User Manual Page 31